[TML] Molding Ships

[GDWGAMES at aol.com]

>> Actually, printed circuit boards could have been made well before 
> >then. The modern "photo resist" tricks aren't necessary.
> >
> >I did my first board by using a brush to paint on the resist where I 
> >wanted it. For mass production, a stencil and roller will work just 
> >fine. You'll get more bad boards, but not that many. And most of 
> >those can be eliminated by hand inspecting the boards before they go 
> >into the etching solution. Any that look "iffy" go back and get the 
> >resist (paint!) stripped and sent back thru.

What about some form of offset lithography?

LKW


**************************************
 See what's new at http://www.aol.com